The Reasons Why It Is Important To Winterize Your Sprinkler System

Failure to winterize sprinklers can result in water freezing up in irrigation valves, pipes, and sprinkler heads. This could lead to serious damage. Because water expands as it freezes, it can cause serious damage to your sprinkler system.

There are three distinct approaches to ending the use of your irrigation system for the season, and they are as follows:

  • The manual drain technique
  • The automatic drain valve system
  • The air blowout method

How To Prepare Your Sprinkler System For The Winter?

When it comes to winterizing an irrigation system, the majority of lawn sprinkler manufacturers advise using an air blowout system. The entire system may be devoid of water by utilizing air pressure to move through the valves, pipelines, and sprinkler heads.

Even if you can blow out your system on your own, it is strongly advised that you engage a professional for sprinkler blowout Denver.

If you want to perform the winterization process on your own, make sure you are familiar with the following:

  1. The amount of water that moves through each irrigation zone in terms of gallons per minute (GPM). You can determine the size of the air compressor you require for the work based on the GPM.
  2. If you have a backflow preventer, you need to clean it out by blowing air through it.
  3. Blowing out your system requires an adequate amount of air volume in addition to enough air pressure. It is important that you only use the appropriate quantity of air volume while blowing out your sprinkler.
  4. After flushing part of the water out of the system, if you do not utilize a sufficient amount of air volume, the air will climb to the top of the water and become trapped there. Because of the movement of the air, the water eventually drained into the bottom.
  5. You should never clean out more than one section of your system at a time.
  6. If you blow out more than one zone at the same time, you run the danger of the pipes and fittings melting as well as overheating because of the increased temperature. Even if your pipes and valves do not break right now, there is a possibility that they are still damaged.
  7. You will know that you selected the appropriate air compressor size for the task if, after you have done blowing out the system, the sprinkler heads remain elevated above the ground.

The Role Of An Irrigation Contractor In The Winterization Process Of Your Irrigation System

If you are not someone who enjoys doing things on their own or if this is your first time owning a lawn sprinkler, it is in your best interest to employ a licensed irrigation system contractor. They are knowledgeable in the processes of designing, installing, and maintaining your system throughout the year thanks to the training they have received.

To be able to blow out your sprinkler, you need to have a mechanical and technological understanding of dealing with air volume and air pressure, as well as the ability to calculate the ratio between the two. If you make a mistake when estimating the air volume or if you choose an air compressor that is too small for your lawn sprinkler, you can soon destroy it.

When blowing out the system, you must take additional safety precautions, including as protecting your eyes by using safety glasses and avoiding standing directly above the sprinkler heads.

Leave a Comment