Netgear Extender Not Connecting to Internet? Here’s the Fix!

Have you been wondering why your Netgear WiFi range extender keeps dropping connection? Well, we are here to put an end to your worry! With the help of this blog post, we’ll make you aware of the reasons why you’re facing the Netgear extender not connecting to internet issue along with the tips to troubleshoot it.

There can be various reasons why your WiFi device isn’t connecting to the internet. Outdated firmware, poor connection between extender and router, improper hardware configuration, damaged Ethernet cable, incorrect mywifiext setup and what not!

Regardless of the reason that might have led to the issue, our technical experts will surely help you resolve it. So, without wasting any further time, scroll down, and read on.

Troubleshooting: Netgear Extender Not Connecting to Internet Issue

Ready to troubleshoot the issue at hand? If yes, what are you waiting for? Let’s get started.

  • Start by properly setting up the hardware of your Netgear WiFi range extender. Check whether the cable connecting your device to the wall socket is in good condition. If it isn’t, then it is recommended that you get it replaced with a new cable.

  • Have you connected your extender and router with an Ethernet cable? Good. You’ve made the right choice. However, sometimes, the right choice can lead to consequences if you aren’t careful enough. In order words, verify whether the cable connecting your devices is free of damages. If it isn’t, connect your devices wirelessly instead.

  • Where have you placed your Netgear extender? Somewhere near electronic devices and transmitting appliances? Oops! Looks like you found another reason why you’re facing the Netgear extender not connecting to internet issue. To fix it, make sure that your extender is placed at its ideal location. It shouldn’t be surrounded by electronic devices like cordless phones, washing machines, televisions, treadmills, baby monitors, and much more.

  • Power cycle your Netgear extender. Why? Well, at times, your device might not connect to the internet because of a technical glitch. So, in order to get rid of that glitch, restarting your WiFi device is important.

None of these were of assistance to you? It seems that we need to pull the ace card out of the deck. Walk through the advanced troubleshooting tips mentioned below. Hopefully, they’ll help you out in getting rid of the Netgear extender not connecting to internet issue.

Advanced Troubleshooting Tips

  1. Update the Firmware

An outdated firmware is one of the major reasons why your Netgear extender is dropping connection. Therefore, update your firmware every single time before logging into your device by accessing mywifiext Follow the steps outlined below to update your WiFi range extender:

  • Switch on your Netgear extender and connect it to the modem.

  • Rather than using a cable, connect your devices wirelessly.

  • Next, open up your laptop and launch a web browser on it.

  • Access mywifiext.net to log into your Netgear WiFi extender.

  • Go to Advanced > Administration.

  • If there are any updates available, click on the Firmware Update button.

Now, follow the on-screen instructions to update your device to its latest firmware version.

  1. Perform Factory Default Reset

Caution: Resetting your device will restore it to factory default settings. In order words, every change that you’ve made to your extender till date will get vanished into thin air.

  • Grab a cable and create a connection between your Netgear extender and router.

  • Look for the Reset button at the bottom of your Netgear WiFi range extender.

  • Once found, take a sharp object, and carefully press the Reset button.

  • Within a couple of seconds, your extender will get restored to its default mode.

Note: If you want to reset the extender using your phone, you need to access mywifiext local.

- Advertisement -