This article will show you how to connect your HP printer with the new WiFi router. Two guides have been created to assist you in setting up your HP wireless network. Follow the tutorial to meet the requirements for setup.
- This is the first set of instructions for touchscreen printers.
- This guide is for printers without touchscreen panels.
- This guide is for printers that are compatible with the HP Smart App.
- Connect HP Officejet Pro 8600 series printer to wifi.
Follow these steps if you have problems with your wifi network or your router equipment.
[1] HP printer setup to control touchscreen panel via wireless setup wizard
- First, ensure that your printer is within range of the wifi network.
- Tap the wifi icon at the printer control screen.
- Next, choose the setup option.
- Now you can choose to restore network defaults, or restore network settings.
- To confirm your selections, touch Yes.
- The printer will then revert back to factory default network settings. You should then use the back button.
- Next, select the Wireless icon or Settings icon. Or, choose Network configuration menu.
- Continue by clicking the button to activate the wireless setup wizard.
- The printer will display a list of networks that are available within its range.
- To connect to your HP printer to internet, you must first click on the name of your WiFi network.
- Once the printer and wifi network have been successfully connected, the blue wireless LED on the printer control panel will stop blinking (turn solid). Otherwise, you can also look for Printer Repair in dubai.
Please note: The exact network name must be entered, with any lowercase or uppercase characters.
[2] Wireless setup guides can be used to set up printers that do not have a touchscreen control panel.
- You can find the WPS (WiFi Protection Setup) button by looking on your wireless network. However, you don’t need to press it.
- You should ensure that your printer is within easy reach of your router’s wifi.
- You can now turn on your printer.
- Hold the wireless button down for five seconds or until the light on the control panel starts to blink.
- Next, hold down the WPS button on the wifi router for about 3-5 seconds or until the connection process begins. This should take approximately 2 minutes.
- Once you have established a connection between your router and printer, you are ready to go. After that, the blue wifi light on your control panel will stop blinking.
- Hold the Wireless or Cancel buttons on HP printers and press and hold them until the Wireless or Power lights blink.
- Hold the Wireless button on HP Laser Printers for a few seconds until the Attention light blinks. The gadget may restart.
- For HP Tango printers press and hold the Wireless button at the printer’s backside for five seconds or until the Edge illumination turns to blue.
- Launch the HP Smart App on your computer, and click the Plus Sign to add your device.
- Follow these steps to add your printer.
- For Wi-Fi networks, enter the WEP/WPA password.
- Once the network connection is established, exit the printer setup.
- Once the printer has been connected to the computer you can then check that the blue wireless light at the control panel becomes solid.
Not all routers have WPS buttons. You will need the HP smart app. The HP smart app works with most wireless printers made in 2010 or later.
[3] Download, install, and enjoy the HP Smart app.
- Start by going to the online store and downloading the HP Smart software on Windows or Mac.
- To access all HP services, you will need to create a new HP account if you are using your device for the first time.
- You can log in with your HP login credentials.
- Connect your Mac, Windows 10, or Windows 10 computer or laptop to the local wifi network.
- Make sure that the network signals are strong enough for printer setup.
- During setup, locate the printer close to the Wi-Fi router.
- Now, turn on your HP printer.
- Open the HP Smart App and click the plus (+ sign) to connect your printer with wifi.
- Tap the HP printer configuration button on the HP smart app
- The next step is to enter your router’s WiFi password. This can be either WEP, or WPA.
- The HP smart app will now connect the printer to the local WiFi network.
- You should then complete the setup process by following the instructions on the screen.
- Click the Exit button when your HP printer has been connected to the WiFi.
